Ring size guide
We propose the following method to check the size that may fit you best.
It consists of measuring the contour of the finger with a thread or a piece of paper. As shown in fig.1, the contour of the finger where the ring is located (measure X) and the first phalanx of the finger (measure Y) must be measured. The “Y” measurement is required because the contour of the phalanx may be greater than the “X” contour and in this case the ring would not fit. The size that corresponds to the larger of the two “X/Y” measurements must be chosen. ”.After making the corresponding measurements (fig.2), compare the results in the “Correspondences” table (fig.3) to find out the size of your ring.* Avoid taking the measurement with cold hands.